Carpet cleaning process Mr Bit Cleaning Services Sheffield

Carpet cleaning process

Carpet cleaning process

Step 1 – Pre Inspection

Our expert will inspect your carpet for the fibre type, construction, dye techniques, backing, installation, cushion, heavy areas of soiling or staining & excessive wear and tear.

Step 2 – Move Furniture

If you require we will move the following items of furniture: sofas and lounge suites, tables and chairs, beds on wheels and light furniture that one technician could be expected to move.

Furniture that we don’t move: bookcases, fishtanks, waterbeds, china cabinets, computers and delicate or fragile items. If you require these to be moved you must ensure they are emptied completely.

Step 3 – Edge and Crevice Pre-Vacuuming removes years of built up dust, grime and soils

Dirt, grit and pet hair trapped in inaccessible areas, such as tight crevices and carpet edges, are removed using our edge and crevice tools. Areas that a standard home vacuum cleaner just cannot reach.

Step 4 – High-Powered Vacuuming – 5 times more powerful than a standard home vacuum cleaner!

Our expert will use a specialised high-power vacuum cleaner called a Pilelifter. It pulls carpet fibres into a tight, upright position, while its brushes release trapped dirt and debris from the very base of your carpet.

Step 5 – Pre-Spot Stain Removal avoids permanent staining, discolouring and fabric fade

Incorrect stain removal techniques can permanently “fuse” stains to your carpets and fabric. Mr Bit carpet cleaning team carefully test each stain before treating it using our professional stain removers. Our attention to detail avoids permanent staining, discolouring and fabric fading.

Step 6 – Pre-Spray

Our expert will apply our anti-bacterial Supreme shampoo. This is alcohol based for fast drying and is pH7 (neutral). This is then allowed to penetrate to the base of the carpet and remove any grease or oils adhered to the carpet fibres. Depending on the degree of soiling the dwell time can range from 5-30 minutes

Step 7 – Agitate

Our expert will gently work the cleaning solution into the carpet fibres ensuring as much of the dirt possible is released in order to be removed. At the same time, any remaining soil and dust is transferred to the cleaning solution. We achieve this using a specially designed carpet brush

Step 8 – Rinse Extract

Our expert will rinse the floor area with a powerful hot water extraction machine. This works by first injecting an anti-bacterial deodoriser into the carpet at high pressure. This dislodges any remaining soil from the base of the carpet while killing any germs that reside on the fibres at the same time. Our high powered twin vacuum motors also extract the dirty solution into the waste tank leaving your carpets as dry as possible.

Step 9 – Stain Protection (optional)

After the carpet has been cleaned and the surface of the fibre prepared, we can move on to apply Stain protector. This coats each carpet fibre to inhibit soiling and staining. It allows you to simply clean up any small spillages as it prevents the carpet fibres absorbing oil and water based stains.

Step 10 – Groom

Our expert will rake your carpet fibres back into line using a process called Pile Alignment. As well as ensuring the best visual finish. Pile Alignment also aids drying time.

Step 11 – Replace Furniture

Our expert will replace all furniture using plastic or polystyrene tabs under exposed timber or metal to avoid staining whilst the carpet is still wet as these stains may be impossible to remove.

Step 12 – Post Cleaning Inspection

Our experts will walk through and inspect cleaning results. If you are available he will ensure you are delighted with the service.

Following this carpet cleaning process Mr Bit team achieve really good results when cleaning your carpets.

Leave a Reply

Your email address will not be published. Required fields are marked *